序号 |
所属作者 |
论文题目 |
发表年度 |
发表刊物/会议名称 |
收录 |
1 |
边宇虹 |
Analysis of Thermal-Magnetic-Elastic Stresses and Strains in a Thin Annular Plate with Varying Thickness |
2021 |
International Applied Mechanics |
EI |
2 |
卞立春 |
Temperature and size-dependent modeling for predicting mechanical properties of carbon nanotubes |
2021 |
APPLIED MATHEMATICAL MODELLING |
SCI |
3 |
卞立春 |
A non-local modeling for the influence of fluid forces on vibration characteristics of carbon nanotubes |
2021 |
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS |
SCI |
4 |
卞立春 |
Thermal residual stress and interface binding effects on fiber reinforced composites |
2021 |
Archive of Applied Mechanics |
SCI |
5 |
卞立春 |
Analysis for thermal properties and some influence parameters on carbon nanotubes by an energy method |
2021 |
Applied Mathematical Modelling |
SCI |
6 |
程树良 |
Lightweight high-stiffness single-phase foam metamaterials with fluted resonant cavities for low frequency bandgaps |
2021 |
MATERIALS TODAY COMMUNICATIONS |
SCI |
7 |
郝颖 |
Nonlinear Dynamic Analysis of Axially Moving Laminated Shape Memory Alloy Beam with 1:3 Internal Resonance |
2021 |
MATERIALS |
SCI |
8 |
郝颖 |
STOCHASTIC P-BIFURCATION OF A 3-DOF AIRFOIL WITH STRUCTURAL NONLINEARITY |
2021 |
JOURNAL OF THEORETICAL AND APPLIED MECHANICS |
SCI |
9 |
何威 |
Time, Cost, and Energy Consumption Analysis on Construction Optimization in High-Rise Buildings |
2021 |
JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT |
SCI |
10 |
何威 |
Scheduling Optimization of Prefabricated Buildings under Resource Constraints |
2021 |
KSCE Journal of Civil Engineering |
SCI |
11 |
何威 |
Developing a Resource Allocation Approach for Resource-Constrained Construction Operation under Multi-Objective Operation |
2021 |
SUSTAINABILITY |
SCI |
12 |
何威 |
Experimental Study on the Effect of Conductive Carbon Black Super-P on the Properties of Composite Mortar |
2021 |
NANO |
SCI |
13 |
胡宇达 |
Nonlinear natural vibration of a circular plate in the non-uniform induced magnetic field |
2021 |
ARCHIVE OF APPLIED MECHANICS |
SCI |
14 |
胡宇达 |
THERMOELASTIC STRONGLY NONLINEAR VIBRATION OF ROTATING FUNCTIONALLY GRADED RING PLATE |
2021 |
JOURNAL OF THEORETICAL AND APPLIED MECHANICS |
SCI |
15 |
李慧剑 |
Uniaxial Compression Mechanical Properties of Foam Nickel/Iron-Epoxy Interpenetrating Phase Composites |
2021 |
MATERIALS |
SCI |
16 |
李文强 |
Magneto-Aeroelastic Internal Resonances of a Rotating Circular Plate Based on Gyroscopic Systems Decoupling |
2021 |
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS |
SCI |
17 |
李雨浓 |
The Pile End Mechanism of Jacked Pile in Layered Soils |
2021 |
Indian Geotechnical Journal |
EI |
18 |
李雨浓 |
Load-displacement behaviour of tapered piles: Theoretical modelling and analysis |
2021 |
GEOMECHANICS AND ENGINEERING |
SCI |
19 |
梁希 |
Mechanical Properties of Cemented Particulate Composite: A 3D Micromechanical Model |
2021 |
MATERIALS |
SCI |
20 |
林建军 |
Insight into the diffusivity of particulate composites considering percolation of soft interphases around hard fillers: From spherical to polyhedral particles |
2021 |
POWDER TECHNOLOGY |
SCI |
21 |
林建军 |
Effects of the pore shape polydispersity on the percolation threshold and diffusivity of porous composites: Theoretical and numerical studies |
2021 |
POWDER TECHNOLOGY |
SCI |
22 |
林建军 |
Statistical analysis of the critical percolation of ITZ around polygonal aggregates in three-phase concrete materials |
2021 |
PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS |
SCI |
23 |
刘小蛮 |
Controlled experimental research and model design of double-layer high-frequency vibrating screen machine |
2021 |
Journal of Vibroengineering |
EI |
24 |
龙晓燕 |
Effect of tempering temperature on monotonic and low-cycle fatigue properties of a new low-carbon martensitic steel |
2021 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
SCI |
25 |
邵玉龙 |
Adaptive analysis for phase-field model of brittle fracture of functionally graded materials |
2021 |
ENGINEERING FRACTURE MECHANICS |
SCI |
26 |
沈振兴 |
A new thin beam element with cross-section distortion of the absolute nodal coordinate formulation |
2021 |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science |
SCI |
27 |
王辰 |
An ultra-low-frequency, broadband and multi-stable tri-hybrid energy harvester for enabling the next-generation sustainable power |
2021 |
APPLIED ENERGY |
SCI |
28 |
王鼎 |
Framework for calculating seismic fragility function of urban road networks: A case study on Tangshan City, China |
2021 |
STRUCTURE AND INFRASTRUCTURE ENGINEERING |
SCI |
29 |
肖俊华 |
Fracture analysis on periodic radial cracks emanating from a nano-hole with surface effects in magnetoelectroelastic materials |
2021 |
Engineering Fracture Mechanics |
SCI |
30 |
辛亚军 |
Tunable band gaps and double-negative properties of innovative acoustic metamaterials |
2021 |
Applied Physics A: Materials Science and Processing |
EI |
31 |
辛亚军 |
Properties and tunability of band gaps in innovative reentrant and star-shaped hybrid honeycomb metamaterials |
2021 |
RESULTS IN PHYSICS |
SCI |
32 |
辛亚军 |
Experimental study on the indentation of epoxy resin-aluminum honeycomb composite sandwich panel |
2021 |
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES |
SCI |
33 |
辛亚军 |
Drop weight impact tests on composite sandwich panel of aluminum foam and epoxy resin |
2021 |
Mechanics of Advanced Materials and Structures |
SCI |
34 |
杨昆 |
Effect of parameters on the melting performance of triplex tube heat exchanger incorporating phase change material |
2021 |
RENEWABLE ENERGY |
SCI |
35 |
张景辉 |
A new analytical solution of vibration response of orthotropic composite plates with two adjacent edges rotationally-restrained and the others free |
2021 |
COMPOSITE STRUCTURES |
SCI |
36 |
张洋洋 |
Nanostructural evolution of Al(OH)3 gel formed by the cubic and orthorhombic ye'elimite clinkers of calcium sulfoaluminate cements in an ultra-wide hydration temperature range |
2021 |
CEMENT AND CONCRETE RESEARCH |
SCI |
37 |
张洋洋 |
Mechanical properties and mechanism of nano-CaCO3 enhanced sulphoaluminate cement-based reactive powder concrete |
2021 |
CONSTRUCTION AND BUILDING MATERIALS |
SCI |
38 |
张洋洋 |
Microstructure Control of AH(3) Gel Formed in Various Calcium Sulfoaluminate Cements as a Function of pH |
2021 |
ACS SUSTAINABLE CHEMISTRY & ENGINEERING |
SCI |
39 |
赵庆新 |
Mesomechanical creep model of fly ash-contained cement mortar considering the interfacial transition zone and its influential factors |
2021 |
CONSTRUCTION AND BUILDING MATERIALS |
SCI |
40 |
赵庆新 |
Mechanical performance and microstructure improvement of soda residue-carbide slag-ground granulated blast furnace slag binder by optimizing its preparation process and curing method |
2021 |
CONSTRUCTION AND BUILDING MATERIALS |
SCI |
41 |
赵庆新 |
Development and characterization of a new multi-strength level binder system using soda residue-carbide slag as composite activator |
2021 |
CONSTRUCTION AND BUILDING MATERIALS |
SCI |
42 |
赵庆新 |
Mechanical properties and microstructure of binding material using slag-fly ash synergistically activated by wet-basis soda residue-carbide slag |
2021 |
CONSTRUCTION AND BUILDING MATERIALS |
SCI |
43 |
赵庆新 |
Mechanism Analysis of the Influence of Delay Period on Mechanical Properties of Reactive Powder Concrete |
2021 |
FRONTIERS IN MATERIALS |
SCI |
44 |
何威 |
Research on the mechanical properties and electrical conductivity of cement mortar based on recycled nano‑iron boride |
2021 |
Waste Disposal & Sustainable Energy |
中国科技期刊卓越行动计划 |
45 |
张景辉 |
Free vibration analysis of thin rectangular plates with two adjacent edges rotationally-restrained and the others free using finite Fourier integral transform method |
2021 |
STRUCTURAL ENGINEERING AND MECHANICS |
SCI |
46 |
曹海莹 |
动、静载环境下界面土直剪试验 |
2021 |
吉林大学学报(地球科学版) |
北大核心 |
47 |
曹海莹 |
一种非极限状态主、被动土压力计算方法 |
2021 |
公路交通科技 |
1B |
48 |
陈英杰 |
混合能量原理求解矩形板在静水压力作用下的弯曲 |
2021 |
力学与实践 |
北大核心 |
49 |
杜国君 |
静载荷对夹层圆板超谐波共振的影响 |
2021 |
力学季刊 |
1B |
50 |
杜国君 |
静载荷作用下夹层圆板非线性主共振分析 |
2021 |
机械强度 |
1B |
51 |
高嫄嫄 |
基于解析方法的开裂水泥混凝土路面动力响应 |
2021 |
兰州理工大学学报 |
北大核心 |
52 |
何威 |
少层石墨烯对普通混凝土性能的影响 |
2021 |
硅酸盐通报 |
1B |
53 |
何威 |
集中荷载作用下双层弹性悬臂梁动力学分析 |
2021 |
机械工程学报 |
中国科技期刊卓越行动计划 |
54 |
胡建军 |
射流管伺服阀通油冷却建模与仿真分析 |
2021 |
液压与气动 |
北大核心 |
55 |
胡建军 |
光伏自驱动平板式太阳能空气集热器设计及其性能实验 |
2021 |
太阳能学报 |
1A |
56 |
胡宇达 |
横向常磁场中铁磁圆板的主共振特性与静载效应 |
2021 |
振动与冲击 |
1B |
57 |
胡宇达 |
线载和弹性支承作用面内运动薄板磁固耦合双重共振 |
2021 |
应用数学和力学 |
1B |
58 |
李春雨 |
基于空间重构性的建筑形体与建筑空间设计 |
2021 |
工业建筑 |
北大核心 |
59 |
李洪 |
被动调节模式环路热管型光伏光热系统性能分析 |
2021 |
农业工程学报 |
中国科技期刊卓越行动计划 |
60 |
李晓靓 |
内共振条件下轴向运动梁磁弹性超谐共振研究 |
2021 |
力学季刊 |
1B |
61 |
李雨浓 |
层状地基静压开口管桩的挤土效应研究 |
2021 |
建筑结构 |
北大核心 |
62 |
李哲 |
旋转运动导电圆环板磁弹性参数-谐波联合共振 |
2021 |
应用力学学报 |
1B |
63 |
刘泽良 |
二氧化锆纳米管振动特性有限元分析 |
2021 |
应用力学学报 |
1B |
64 |
潘慧敏 |
基于程序设计的等高线地图着色处理技术 |
2021 |
公路 |
北大核心 |
65 |
沈振兴 |
中心舱体与薄壁梁刚-柔耦合系统的热弹性-结构动力学分析 |
2021 |
固体力学学报 |
1A |
66 |
司秀勇 |
凝结硬化期扰动对混凝土受压声发射特性的影响 |
2021 |
硅酸盐通报 |
1B |
67 |
宋坤 |
斜向地震作用下高轴压比 ＲC 方柱抗震性能试验 |
2021 |
建筑结构 |
北大核心 |
68 |
田振国 |
电磁发射轨道的非傅里叶热应力分析 |
2021 |
应用力学学报 |
1B |
69 |
王鼎 |
基于蒙特卡洛模拟的城市道路网络地震易损性分析 |
2021 |
防灾减灾工程学报 |
北大核心 |
70 |
余为 |
浅谈三根火柴杆悬挂重物的平衡原理 |
2021 |
力学与实践 |
北大核心 |
71 |
张晖辉 |
洛伦兹力与温度场作用下枢轨摩擦磨损特性 |
2021 |
摩擦学学报 |
1A |
72 |
张晖辉 |
喷丸处理Q235钢中晶粒尺寸与残余应力的关系预测 |
2021 |
中国表面工程 |
EI |
73 |
张萍 |
高层建筑立面设计——评《建筑立面设计》 |
2021 |
工业建筑 |
北大核心 |
74 |
张延新 |
不同循环加载应力下花岗岩Kaiser效应特征的试验研究 |
2021 |
实验力学 |
1B |
75 |
赵庆新 |
界面过渡区对混凝土徐变性能的影响 |
2021 |
硅酸盐学报 |
中国科技期刊卓越行动计划 |
76 |
郑久建 |
高烈度区大跨度桥梁粘滞阻尼器减震研究 |
2021 |
世界地震工程 |
北大核心 |
77 |
赵庆新 |
水泥-磨细矿渣固化滨海盐渍土强度及机理 |
2020 |
建筑材料学报 |
EI |
78 |
张景辉 |
Analysis of orthotropic plates by the two-dimensional generalized FIT method |
2020 |
Computers and Concrete |
SCIE |
79 |
张景辉 |
New Analytical Solutions of Buckling Problem of Rotationally-Restrained Rectangular Thin Plates |
2020 |
International Journal of Applied Mechanics |
SCI |
80 |
张天虎 |
Enhanced photocatalytic activity of TiO2 with acetylene black and persulfate for degradation of tetracycline hydrochloride under visible light |
2020 |
Chemical Engineering Journal |
高被引 |
81 |
张晖辉 |
Distribution Characteristics of Electromagnetic Field and Temperature Field of Different Caliber Electromagnetic Railguns |
2020 |
IEEE Transactions on Plasma Science |
SCIE |
82 |
龙晓燕 |
Fatigue Life Assessment in Bainitic Steels Based on The Cumulative Strain Energy Density |
2020 |
Applied Mathematics and Mechanics |
SCIE |
83 |
赵庆新 |
Microstructure and Composition of Red Mud-Fly Ash-Based Geopolymers Incorporating Carbide Slag |
2020 |
FRONTIERS IN MATERIALS |
SCIE |
84 |
何威 |
A Lyapunov Drift-Plus-Penalty-Based Multi-Objective Optimization of Energy Consumption, Construction Period and Benefit |
2020 |
KSCE JOURNAL OF CIVIL ENGINEERING |
SCIE |
85 |
卞立春 |
An effective model for the thermal conductivity of nanoparticle composites/polymers |
2020 |
ACTA MECHANICA |
SCIE |
86 |
王鼎 |
An Evolutionary Spectrum Model of Nonstationary Seismic Ground Motions Considering Extended Source Effect for Engineering Purposes |
2020 |
Journal of Earthquake Engineering |
SCIE |
87 |
张景辉 |
Analytical bending solutions of thin plates with two adjacent edges free and the others clamped or simply supported using finite integral transform method |
2020 |
COMPUTATIONAL & APPLIED MATHEMATICS |
SCIE |
88 |
张景辉 |
Buckling analysis of rectangular thin plates with two opposite edges free and others rotationally restrained by finite Fourier integral transform method |
2020 |
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK |
SCIE |
89 |
龙晓燕 |
Comparative study on microstructures and properties of Mn-containing and Mn-free bainitic steels |
2020 |
MATERIALS SCIENCE AND TECHNOLOGY |
SCIE |
90 |
李文涛 |
Configuration optimization of the novel cogeneration heating system with multi turbine units |
2020 |
ENERGY CONVERSION AND MANAGEMENT |
SCIE |
91 |
徐耀玲 |
Doubly periodic array of coated cylindrical inclusions model and applications for nanocomposites |
2020 |
ACTA MECHANICA |
SCIE |
92 |
卞立春 |
Effects of mixing and clustering properties on hybrid carbon/glass fibers polymer/composite for effective applications |
2020 |
COLLOID AND POLYMER SCIENCE |
SCIE |
93 |
张天虎 |
Enhanced photocatalytic activity of TiO2 with acetylene black and persulfate for degradation of tetracycline hydrochloride under visible light |
2020 |
CHEMICAL ENGINEERING JOURNAL |
SCIE |
94 |
王鼎 |
Evaluation of the Probability Distribution of the Extreme Value of the Response of Nonlinear Structures Subjected to Fully Nonstationary Stochastic Seismic Excitations |
2020 |
JOURNAL OF ENGINEERING MECHANICS |
SCIE |
95 |
龙晓燕 |
Evolution of tensile properties with transformation temperature in medium-carbon carbide-free bainitic steel |
2020 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
SCIE |
96 |
刘小蛮 |
Failure analysis of adhesive surface damage in sandwich plates under compressed loads |
2020 |
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES |
SCIE |
97 |
肖俊华 |
Fracture analysis on a cracked elliptical hole with surface effect in magnetoelectroelastic solid |
2020 |
THEORETICAL AND APPLIED FRACTURE MECHANICS |
SCIE |
98 |
龙晓燕 |
Influence of Mn addition on cyclic deformation behaviour of bainitic rail steels |
2020 |
INTERNATIONAL JOURNAL OF FATIGUE |
SCIE |
99 |
肖俊华 |
In-plane impact dynamics of honeycomb structure containing curved reentrant sides with negative Poisson's ratio effect |
2020 |
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES |
SCIE |
100 |
李慧剑 |
Mechanical and electronic properties of van der Waals layered hcp PdH2 |
2020 |
SCIENTIFIC REPORTS |
SCIE |
101 |
张晖辉 |
Mechanism of Butterfly-Shaped Failure Interface Between Armature and Rails |
2020 |
IEEE TRANSACTIONS ON PLASMA SCIENCE |
SCIE |
102 |
刘俊 |
Multiphase DMA Design Methodology Based on Graph Theory and Many-Objective Optimization |
2020 |
JOURNAL OF WATER RESOURCES PLANNING AND MANAGEMENT |
SCIE |
103 |
胡建军 |
Numerical and experimental investigation of solar air collector with internal swirling flow |
2020 |
Renewable Energy |
SCIE |
104 |
张天虎 |
Optimal design of building environment with hybrid genetic algorithm, artificial neural network, multivariate regression analysis and fuzzy logic controller |
2020 |
BUILDING AND ENVIRONMENT |
SCIE |
105 |
肖俊华 |
Porosity-dependent percolation threshold and frequency-dependent electrical properties for highly aligned graphene-polymer nanocomposite foams |
2020 |
MATERIALS TODAY COMMUNICATIONS |
SCIE |
106 |
刘建明 |
Preparation of Functional CNT-COOH-Cu Nanocomposites Using Carbon Nanotubes and Application for Reduction of p-Nitrophenol |
2020 |
INTEGRATED FERROELECTRICS |
SCIE |
107 |
张天虎 |
Removal of formaldehyde in urban office building by the integration of ventilation and photocatalyst-coated window |
2020 |
SUSTAINABLE CITIES AND SOCIETY |
SCIE |
108 |
吴君华 |
Research on thermal storage and release capacity of freezing sandy soil with phase change |
2020 |
APPLIED THERMAL ENGINEERING |
SCIE |
109 |
卞立春 |
Stress distribution analysis and interface influence on fiber reinforced composites |
2020 |
MECHANICS OF MATERIALS |
SCIE |
110 |
赵庆新 |
Study on frost resistance and vegetation performance of seashell waste pervious concrete in cold area |
2020 |
Construction and Building Materials |
SCIE |
111 |
肖俊华 |
Surface effects of electroelastic tip fields of multiple cracks emanating from a circular hole |
2020 |
ENGINEERING FRACTURE MECHANICS |
SCIE |
112 |
卞立春 |
Temperature-related study on buckling properties of double-walled carbon nanotubes |
2020 |
European Journal of Mechanics, A/Solids |
SCIE |
113 |
卞立春 |
Theoretical modeling relating to temperature and cap/end for carbon nanotubes under hydrostatic pressure |
2020 |
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK |
SCIE |
114 |
边宇虹 |
Thermal-Magnetic-Elastic Effect Analysis of a Thin Current-Carrying Conical Frustum Shell* |
2020 |
International Applied Mechanics |
EI |
115 |
沈振兴 |
Viscoelastic analysis of bistable composite shells via absolute nodal coordinate formulation |
2020 |
COMPOSITE STRUCTURES |
SCIE |
116 |
刘峰 |
Wear Characteristics of Rail-Armature Under the Action of Interference Fit and Lorentz Force |
2020 |
IEEE TRANSACTIONS ON PLASMA SCIENCE |
SCIE |
117 |
张淑彦 |
Study on a novel district heating system combining clean coal-fired cogeneration with gas peak shaving |
2020 |
Energy Conversion and Management |
SCIE |
118 |
郝圣旺 |
Non-monotonic precursory signals to multi-scale catastrophic failures |
2020 |
International Journal of Fracture |
SCIE |
119 |
辛亚军 |
Study on the sickle anchoring joint in external prestressing strengthening of portal frame |
2020 |
Structures |
SCIE |
120 |
余为 |
考虑界面的空心玻璃微珠/环氧树脂复合泡沫材料的力学性能仿真分析 |
2020 |
材料导报 |
EI |
121 |
赵庆新 |
水泥-磨细矿渣加固滨海盐渍土的强度及机理 |
2020 |
建筑材料学报 |
EI |
122 |
赵庆新 |
贝壳垃圾透水植生混凝土抗冻性能研究 |
2020 |
长江科学院院报 |
北大核心 |
123 |
潘慧敏 |
粗骨料最大粒径对混凝土受早期扰动后力学性能的影响 |
2020 |
硅酸盐通报 |
1B |
124 |
陈英杰 |
弹塑性弯曲直梁的回弹变分原理及应用 |
2020 |
科学技术与工程 |
北大核心 |
125 |
胡宇达 |
功能梯度旋转圆板的热弹性固有振动 |
2020 |
力学季刊 |
1B |
126 |
李慧剑 |
混凝土单轴压缩短时蠕变破坏幂律行为研究 |
2020 |
硅酸盐通报 |
1B |
127 |
何威 |
基于Lyapunov动态队列控制技术的施工期能耗权衡设计 |
2020 |
土木工程与管理学报 |
北大核心 |
128 |
边宇虹 |
基于热-磁-弹性耦合的二维导电薄柱壳数值分析 |
2020 |
力学季刊 |
1B |
129 |
胡建军 |
近距离淹没冲击射流动态流场特性 |
2020 |
机械工程学报 |
中国科技期刊卓越行动计划 |
130 |
武崇福 |
考虑刀盘结构形式影响的盾构施工引起的地表沉降分析 |
2020 |
应用力学学报 |
1B |
131 |
杜国君 |
考虑空气阻力影响的振动筛分物料的运动分析 |
2020 |
力学季刊 |
1B |
132 |
王美达 |
土楼晨光 |
2020 |
中国高等教育 |
1A |
133 |
杜国君 |
振动筛非线性谐波共振研究 |
2020 |
应用力学学报 |
1B |
134 |
胡宇达 |
轴向运动导电条形板的磁弹性主-内联合共振 |
2020 |
应用力学学报 |
1B |
135 |
刘峰 |
3种口径电磁轨道炮电磁特性研究 |
2020 |
火炮发射与控制学报 |
北大核心 |
136 |
李雨浓 |
饱和黏土中考虑土塞效应的柱孔扩张分析 |
2020 |
应用力学学报 |
1B |
137 |
何威 |
弹性地基双层梁理论下的混凝土路面力学分析 |
2020 |
应用力学学报 |
1B |
138 |
田振国 |
电磁发射轨道的温度场及非傅里叶热效应 |
2020 |
兵器装备工程学报 |
北大核心 |
139 |
肖俊华 |
电可通纳米尺度孔边均布多裂纹的电弹断裂分析 |
2020 |
固体力学学报 |
1A |
140 |
肖俊华 |
负泊松比曲边内凹蜂窝结构的面内冲击动力学数值研究 |
2020 |
中国机械工程 |
1A |
141 |
杜国君 |
构造上正交各向异性半球形凸起凹凸板等效刚度研究 |
2020 |
应用数学和力学 |
1B |
142 |
李洪 |
光伏-环路热管/热泵热水系统在不同气候区性能对比与优化 |
2020 |
农业工程学报 |
中国科技期刊卓越行动计划 |
143 |
赵庆新 |
海水拌合对盐渍土加固性能的影响 |
2020 |
硅酸盐通报 |
1B |
144 |
李慧剑 |
混凝土单轴压缩破碎分形研究 |
2020 |
硅酸盐通报 |
1B |
145 |
李慧剑 |
基于强度表征的混凝土脆性指标影响因素研究 |
2020 |
力学季刊 |
1B |
146 |
王立伟 |
基于倾角演化的滑坡监测及稳定过程 |
2020 |
工程力学 |
中国科技期刊卓越行动计划 |
147 |
孙志坚 |
集合住宅预制装配式建筑结构主体工业化技术研究 |
2020 |
建筑学报 |
1A |
148 |
刘峰 |
接触电阻对电磁轨道炮电磁场影响分析 |
2020 |
火炮发射与控制学报 |
北大核心 |
149 |
胡建军 |
近距离下射流冲击平板PIV实验研究 |
2020 |
力学学报 |
1A |
150 |
陈英杰 |
矩形夹层板稳定性分析 |
2020 |
力学季刊 |
1B |
151 |
肖俊华 |
考虑表面效应时孔边均布径向多裂纹Ⅲ型断裂力学分析 |
2020 |
应用数学和力学 |
1B |
152 |
刘峰 |
考虑接触电阻的电磁发射装置温度场分析 |
2020 |
兵器材料科学与工程 |
北大核心 |
153 |
李雨浓 |
考虑渗流影响的球孔扩张理论解答 |
2020 |
应用力学学报 |
1B |
154 |
胡建军 |
利用首腔窄化强化折流板型太阳能集热器性能研究 |
2020 |
太阳能学报 |
1A |
155 |
胡建军 |
利用旋流效应强化平板型太阳能空气集热器性能 |
2020 |
农业工程学报 |
中国科技期刊卓越行动计划 |
156 |
辛亚军 |
泡沫铝-环氧树脂复合夹芯梁动态三点弯曲试验研究 |
2020 |
燕山大学学报 |
北大核心 |
157 |
张任良 |
气-液界面对亲水微通道减阻特性的影响研究 |
2020 |
燕山大学学报 |
北大核心 |
158 |
王美达 |
浅谈设计手绘的气质表达 |
2020 |
美术观察 |
北大核心 |
159 |
李雨浓 |
球(柱)孔扩张问题的扩孔压力与扩孔半径分析 |
2020 |
应用力学学报 |
1B |
160 |
胡宇达 |
热环境中旋转运动功能梯度圆板的强非线性固有振动 |
2020 |
固体力学学报 |
1A |
161 |
王平 |
四边简支载流纳米板的磁弹性稳定问题分析 |
2020 |
应用力学学报 |
1B |
162 |
徐耀玲 |
无限介质中单个纳米涂层夹杂反平面问题的两个模型 |
2020 |
力学季刊 |
1B |
163 |
李洪 |
新型太阳能光伏-环路热管/热泵热水系统 |
2020 |
太阳能学报 |
1A |
164 |
何威 |
悬臂式电磁发射导轨及壁板在发射状态下的强度分析 |
2020 |
兵工学报 |
1A |
165 |
王平 |
压电双层微板首次穿越问题研究 |
2020 |
应用力学学报 |
1B |
166 |
肖俊华 |
一维六方准晶中纳米尺度开裂孔洞的Ⅲ型断裂力学 |
2020 |
固体力学学报 |
1A |
167 |
曹海莹 |
运营期上硬下软型双层地基动力损伤评价 |
2020 |
公路交通科技 |
1B |
168 |
边宇虹 |
周边固定载流壳体的热磁弹性分析 |
2020 |
机械强度 |
1B |
169 |
胡宇达 |
轴向运动正交各向异性板的超谐波共振及稳定性 |
2020 |
应用力学学报 |
1B |
170 |
胡建军 |
自激振荡型气动喷嘴的实验及数值模拟研究 |
2020 |
液压与气动 |
北大核心 |
171 |
曹海莹 |
非极限状态主动土压力与填土张拉裂缝研究 |
2020 |
中国公路学报 |
中国科技期刊卓越行动计划 |
172 |
胡建军 |
A self-driven mechanical ventilated solar air collector: Design and experimental study |
2019 |
ENERGY |
SCIE |
173 |
卞立春 |
A re-formulation of the Mori-Tanaka method for predicting material properties of fiber-reinforced polymers/composites |
2019 |
COLLOID AND POLYMER SCIENCE |
SCIE |
174 |
张天虎 |
Control of a novel synthetical index for the local indoor air quality by the artificial neural network and genetic algorithm |
2019 |
SUSTAINABLE CITIES AND SOCIETY |
SCIE |
175 |
卞立春 |
A physics investigation for influence of carbon nanotube agglomeration on thermal properties of composites |
2019 |
MATERIALS CHEMISTRY AND PHYSICS |
SCIE |
176 |
赵庆新 |
Experimental research for elastic modulus of cement paste at ultra-early age based on indentation technique |
2019 |
CONSTRUCTION AND BUILDING MATERIALS |
SCIE |
177 |
沈振兴 |
Thermal-structural dynamic analysis of a satellite antenna with the cable-network and hoop-truss supports |
2019 |
JOURNAL OF THERMAL STRESSES |
SCIE |
178 |
卞立春 |
Micromechanics analysis for thermal expansion coefficients of three-phase particle composites |
2019 |
ARCHIVE OF APPLIED MECHANICS |
SCIE |
179 |
胡宇达 |
Magnetoelastic combined resonance and stability analysis of a ferromagnetic circular plate in alternating magnetic field |
2019 |
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION |
SCIE |
180 |
何威 |
Multiobjective Construction Optimization Model Based on Quantum Genetic Algorithm |
2019 |
ADVANCES IN CIVIL ENGINEERING |
SCIE |
181 |
卞立春 |
A new energy-based effective strain theory for mechanical properties of multiphase composites |
2019 |
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS |
SCIE |
182 |
张任良 |
Capillary imbibition in pattern charged nanotubes |
2019 |
JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT |
SCIE |
183 |
郝颖 |
RANDOM FLUTTER OF MULTI-STABLE AIRFOILS EXCITED PARAMETRICALLY IN STEADY FLOWS |
2019 |
JOURNAL OF MECHANICS |
SCIE |
184 |
龙晓燕 |
Study on quasi-in-situ tensile deformation behavior in medium-carbon carbide-free bainitic steel |
2019 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
SCIE |
185 |
李哲 |
MAGNETO-ELASTIC COMBINED MULTIDIMENSIONAL RESONANCE OF A ROTATING CIRCULAR PLATE IN A DOUBLE-DIRECTION MAGNETIC FIELD |
2019 |
JOURNAL OF THEORETICAL AND APPLIED MECHANICS |
SCIE |
186 |
龙晓燕 |
Study on Bainitic Transformation by Dilatometer and In Situ LSCM |
2019 |
MATERIALS |
SCIE |
187 |
肖俊华 |
The generalized self-consistent micromechanics prediction of the magnetoelectroelastic properties of multi-coated nanocomposites with surface effect |
2019 |
SMART MATERIALS AND STRUCTURES |
SCIE |
188 |
卞立春 |
Thermal environment and strain energy related micro-model for properties of carbon nanotubes |
2019 |
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS |
SCIE |
189 |
胡建军 |
Flow measurement and parameter optimization of right-angled flow passage in hydraulic manifold block |
2019 |
JOURNAL OF CENTRAL SOUTH UNIVERSITY |
SCIE |
190 |
沈振兴 |
Thermoelastic-Structural Analysis of Space Thin-Walled Beam Under Solar Flux |
2019 |
AIAA JOURNAL |
SCIE |
191 |
郝颖 |
Traverse Vibration of Axially Moving Laminated SMA Beam considering Random Perturbation |
2019 |
SHOCK AND VIBRATION |
SCIE |
192 |
徐正侠 |
Controllable synthesis and tunable photocatalytic activity of TiO2 nanowires via alcohol-thermal method |
2019 |
RARE METALS |
SCIE |
193 |
胡建军 |
Performance improvement of baffle-type solar air collector based on first chamber narrowing |
2019 |
RENEWABLE ENERGY |
SCIE |
194 |
何威 |
Dynamic Response of Double Elastic Cantilever Beam Attributed to Variable Uniformly Distributed Load |
2019 |
MATHEMATICAL PROBLEMS IN ENGINEERING |
SCIE |
195 |
卞立春 |
Environment and strain energy related micromechanics analysis for properties of carbon nanotubes |
2019 |
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK |
SCIE |
196 |
胡建军 |
Performance improvement of solar air collector based on airflow reorganization: A review |
2019 |
APPLIED THERMAL ENGINEERING |
SCIE |
197 |
胡宇达 |
Magnetoelastic axisymmetric multi-modal resonance and Hopf bifurcation of a rotating circular plate under aerodynamic load |
2019 |
NONLINEAR DYNAMICS |
SCIE |
198 |
胡宇达 |
Magneto-elastic internal resonance of an axially moving conductive beam in the magnetic field聽聽聽聽(Open Access) |
2019 |
Journal of Theoretical and Applied Mechanics (Poland) |
SCIE |
199 |
高嫄嫄 |
Theoretical Analysis of Reflective Cracking in Asphalt Pavement with Semi-rigid Base |
2019 |
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING |
SCIE |
200 |
何威 |
Construction of a 5D duration and cost optimisation model based on genetic algorithm and BIM |
2019 |
Journal of Engineering, Design and Technology |
EI |
201 |
司秀勇 |
Analytical Solutions to Elastic Static Force of PBL Shear Connectors |
2019 |
Zhongguo Tiedao Kexue/China Railway Science |
EI |
202 |
谈宏莹 |
Investigation of Bovine Serum Albumin at Different Temperatures by Terahertz Time-Domain Spectroscopy |
2019 |
Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis |
EI |
203 |
卞立春 |
Energy Method for Stress-Free Zigzag Single-Walled Carbon Nanotubes |
2019 |
2019 4TH INTERNATIONAL WORKSHOP ON MATERIALS ENGINEERING AND COMPUTER |
CPCI |
204 |
朱瑞广 |
Copula-Based Correlation Analysis of Intensity Measures of Mainshock-Aftershock Ground Motions |
2019 |
Gongcheng Lixue/Engineering Mechanics |
EI |
205 |
李洪 |
Performance optimization and benefit analyses of a photovoltaic loop heat pipe/solar assisted heat pump water heating system |
2019 |
RENEWABLE ENERGY |
SCIE |
206 |
曹海莹 |
Combinatorial Calculation Model of Active Earth Pressure under Non-limit State and Its Engineering Application |
2019 |
Yingyong Jichu yu Gongcheng Kexue Xuebao/Journal of Basic Science and Engineerin |
EI |
207 |
胡宇达 |
Parametric and primary resonance of an axially moving conductive beam between current-carrying wires |
2019 |
Zhendong yu Chongji/Journal of Vibration and Shock |
EI |
208 |
胡宇达 |
Subharmonic resonance for in-plane motion of orthotropic plates under linear loads |
2019 |
Zhendong yu Chongji/Journal of Vibration and Shock |
EI |
209 |
赵庆新 |
Microstructure and Composition of Hardened Paste of Soda Residue-Slag-Cement Binding Material System |
2019 |
FRONTIERS IN MATERIALS |
SCIE |
210 |
肖俊华 |
Fracture analysis of magnetoelectroelastic solid weakened by periodic cracks and line inclusions |
2019 |
ENGINEERING FRACTURE MECHANICS |
SCIE |
211 |
胡建军 |
一种复合方法抑制叶尖泄漏的试验及模拟研究 |
2019 |
北京航空航天大学学报 |
EI |
212 |
肖俊华 |
负泊松比可变弧角曲边内凹蜂窝结构的力学性能 |
2019 |
中国机械工程 |
1A |
213 |
肖俊华 |
基于表面弹性理论的开裂椭圆孔断裂力学研究 |
2019 |
固体力学学报 |
1A |
214 |
郝圣旺 |
连续损伤力学基临界奇异指数与破坏时间预测 |
2019 |
力学学报 |
1A |
215 |
肖俊华 |
压电体中考虑表面效应时开裂孔洞的断裂特征 |
2019 |
固体力学学报 |
1A |
216 |
胡宇达 |
Parametric and primary resonance of an axially moving conductive beam between current-carrying wires |
2019 |
振动与冲击 |
1B |
217 |
胡宇达 |
Subharmonic resonance for in-plane motion of orthotropic plates under linear loads |
2019 |
振动与冲击 |
1B |
218 |
边宇虹 |
变厚度载流旋转壳体的热磁弹性分析 |
2019 |
力学季刊 |
1B |
219 |
陈英杰 |
功的互等法在简谐分布力矩下矩形板受迫振动问题的应用 |
2019 |
应用力学学报 |
1B |
220 |
胡宇达 |
横向磁场中轴向运动铁磁梁的磁弹性主共振 |
2019 |
力学季刊 |
1B |
221 |
朱瑞广 |
基于Copula函数的主余震地震动强度参数相关性分析 |
2019 |
工程力学 |
1B |
222 |
徐耀玲 |
基于界面层模型的双周期纳米夹杂复合材料反平面问题研究 |
2019 |
力学季刊 |
1B |
223 |
边宇虹 |
基于热-磁-固耦合的圆台薄壳应力与变形分析 |
2019 |
机械设计 |
1B |
224 |
胡宇达 |
交变磁场和力场联合激励铁磁圆板的主共振 |
2019 |
应用力学学报 |
1B |
225 |
何威 |
聚氨酯喷涂法在排水管道修复中的应力分析与应用 |
2019 |
应用力学学报 |
1B |
226 |
潘慧敏 |
扰动对混凝土性能影响的尺寸效应试验研究 |
2019 |
硅酸盐通报 |
1B |
227 |
胡建军 |
入口脉动对太阳能空气集热器性能影响研究 |
2019 |
热能动力工程 |
1B |
228 |
潘慧敏 |
水泥基材料超早期弹性模量研究进展 |
2019 |
硅酸盐通报 |
1B |
229 |
胡宇达 |
随从力作用轴向运动叠层板的亚谐波共振 |
2019 |
工程力学 |
1B |
230 |
胡宇达 |
线载荷作用下面内运动正交各向异性板的亚谐波共振 |
2019 |
振动与冲击 |
1B |
231 |
胡建军 |
叶尖自发射流条件下涡轮非定常流动的数值模拟 |
2019 |
热能动力工程 |
1B |
232 |
胡宇达 |
载流导线间轴向运动导电梁的参数-主共振 |
2019 |
振动与冲击 |
1B |
233 |
胡宇达 |
载流线圈非均匀感应磁场中圆板的磁弹性固有振动 |
2019 |
应用力学学报 |
1B |
234 |
胡宇达 |
载流线圈中导电圆板的磁弹性固有振动 |
2019 |
机械强度 |
1B |
235 |
郝颖 |
轴向运动SMA层合梁的主共振分析 |
2019 |
应用力学学报 |
1B |
236 |
赵庆新 |
碱渣-矿渣复合胶凝材料硬化体的微观结构与组成 |
2019 |
建筑材料学报 |
二级期刊 |
237 |
田振国 |
结构力学教学中的几个问题 |
2019 |
力学与实践 |
二级期刊 |
238 |
赵庆新 |
水泥-磨细矿渣加固滨海盐渍土的强度及机理 |
2019 |
建筑材料学报 |
二级期刊 |
239 |
潘鹏程 |
PPP项目公司资金管理方式探讨——基于法定盈余公积金分析 |
2019 |
工程经济 |
SCD |
240 |
潘鹏程 |
充电基础设施PPP项目特许期决策研究 |
2019 |
工程管理学报 |
SCD |
241 |
王鼎 |
大跨度拱形空间桁架干煤棚的地震易损性分析 |
2019 |
四川建筑科学研究 |
SCD |
242 |
曹海莹 |
非极限状态主动土压力的组合计算模型及工程应用 |
2019 |
应用基础与工程科学学报 |
SCD |
243 |
田振国 |
轨道炮发射状态下复合轨道的温度场分析 |
2019 |
燕山大学学报 |
SCD |
244 |
何威 |
基于BIM–遗传算法的建筑施工期多目标优化设计 |
2019 |
土木工程与管理学报 |
SCD |
245 |
张晖辉 |
考虑过盈配合与磨损的枢轨接触状态分析 |
2019 |
兵器材料科学与工程 |
SCD |
246 |
胡建军 |
射流管伺服阀前置级建模及参数匹配研究 |
2019 |
北京理工大学学报 |
SCD |
247 |
胡宇达 |
双平行导线间轴向运动导电梁的动力稳定性 |
2019 |
燕山大学学报 |
SCD |
248 |
杜国君 |
周期性正弦凸起凹凸板等效刚度的研究 |
2019 |
应用数学和力学 |
SCD |
